Industrial Finger Jointer #C640
Reconditioned Industrial Finger Jointer Model 3870 Shaper with FJA100 Assembly consisting of:
Industrial Woodworking Model 3870 Dual Finger Jointer Shaper with speeds up to 45FPM fixed speed electric drive. With the lugs on 9” centers, 60 pieces per minute with material 6” wide. With the lugs on 12” centers, 45 pieces per minute with the material 8” wide. The shaper is furnished with 10 HP cutterhead and 5 HP trim saw motors, Automatic Glue spreader, and Pressurized glue tank. The 3870 has a 4” minimum length, 48” maximum length, 1.5” minimum width, 8” maximum width, .625” minimum thickness, and 2” maximum thickness.
FJA100 Finger Joint Assembly Machine, automatic operation, pneumatic assembly, and makes assembled lengths up to 16’ in length. The machine stops during the cut-of and squeeze pressure cycle. Variable speeds of up to 100’ per minute.
This system includes the shaper, assemble machine, glue applicator, and electrical. This system requires three people to operate the system which is one to feed the shaper, one to transfer the material to the assembly machine and one to tail the assembly machine.
The machine will be checked out completely including but not limited to all motors being megged out and tested, all bearings will be reviewed and replaced where necessary, the chains, rails and hold downs will all be reviewed and replaced as needed. The customer is certainly invited to visit our facility to inspect the machine and test run the customer’s parts. We would appreciate receiving some of the customer’s material for us to test the machine prior to the run off. Cutterheads and tooling not included.
Note: I have had a brief discussion with Apquip to check on the feasibility of adapting their gluing system onto these systems. I do believe that it is very possible at some unknown additional cost at this time.
Delivery: approximately 8 weeks.
F.O.B. Manawa, WI
Terms: 50% down with order, 40% upon completion of a successful run off at Crosscut Solutions Inc. in Manawa, WI, and the balance upon shipping. Once the machine has completed a successful run-off, and the machine is ready to ship, the customer must accept delivery at that time without delay.
For questions on this item
please call (920) 596-2571 or
e-mail us at email@example.com